[Go to CFHT Home Page] Man Pages
Back to Software Index  BORDER=0Manpage Top Level
    ELF(5) manual page Table of Contents

Name

elf - format of Executable and Linking Format (ELF) files

Synopsis


#include <elf.h>

Description

The header file <elf.h> defines the format of ELF executable binary files. Amongst these files are normal executable files, relocatable object files, core files and shared libraries.

An executable file using the ELF file format consists of an ELF header, followed by a program header table or a section header table, or both. The ELF header is always at offset zero of the file. The program header table and the section header table’s offset in the file are defined in the ELF header. The two tables describe the rest of the particularities of the file.

This header file describes the above mentioned headers as C structures and also includes structures for dynamic sections, relocation sections and symbol tables.

The following types are used for N-bit architectures (N=32,64, ElfN stands for Elf32 or Elf64, uintN_t stands for uint32_t or uint64_t): 

ElfN_Addr       Unsigned program address, uintN_t
ElfN_Off        Unsigned file offset, uintN_t
ElfN_Section    Unsigned section index, uint16_t
ElfN_Versym     Unsigned version symbol information, uint16_t
Elf_Byte        unsigned char
ElfN_Half       uint16_t
ElfN_Sword      int32_t
ElfN_Word       uint32_t
ElfN_Sxword     int64_t
ElfN_Xword      uint64_t

(Note: The *BSD terminology is a bit different. There Elf64_Half is twice as large as Elf32_Half, and Elf64Quarter is used for uint16_t. In order to avoid confusion these types are replaced by explicit ones in the below.)

All data structures that the file format defines follow the "natural" size and alignment guidelines for the relevant class. If necessary, data structures contain explicit padding to ensure 4-byte alignment for 4-byte objects, to force structure sizes to a multiple of 4, and so on.

The ELF header is described by the type Elf32_Ehdr or Elf64_Ehdr: 

#define EI_NIDENT 16
typedef struct {
    unsigned char e_ident[EI_NIDENT];
    uint16_t      e_type;
    uint16_t      e_machine;
    uint32_t      e_version;
    ElfN_Addr     e_entry;
    ElfN_Off      e_phoff;
    ElfN_Off      e_shoff;
    uint32_t      e_flags;
    uint16_t      e_ehsize;
    uint16_t      e_phentsize;
    uint16_t      e_phnum;
    uint16_t      e_shentsize;
    uint16_t      e_shnum;
    uint16_t      e_shstrndx;
} ElfN_Ehdr;

The fields have the following meanings:

e_ident
This array of bytes specifies to interpret the file, independent of the processor or the file’s remaining contents. Within this array everything is named by macros, which start with the prefix EI_ and may contain values which start with the prefix ELF. The following macros are defined:
EI_MAG0
The first byte of the magic number. It must be filled with ELFMAG0. (0: 0x7f)
EI_MAG1
The second byte of the magic number. It must be filled with ELFMAG1. (1: aqEaq)
EI_MAG2
The third byte of the magic number. It must be filled with ELFMAG2. (2: aqLaq)
EI_MAG3
The fourth byte of the magic number. It must be filled with ELFMAG3. (3: aqFaq)
EI_CLASS
The fifth byte identifies the architecture for this binary:
ELFCLASSNONE
This class is invalid.
ELFCLASS32
This defines the 32-bit architecture. It supports machines with files and virtual address spaces up to 4 Gigabytes.
ELFCLASS64
This defines the 64-bit architecture.
EI_DATA
The sixth byte specifies the data encoding of the processor-specific data in the file. Currently these encodings are supported:
ELFDATANONE
Unknown data format.
ELFDATA2LSB
Two’s complement, little-endian.
ELFDATA2MSB
Two’s complement, big-endian.
EI_VERSION
The seventh byte is the version number of the ELF specification:
EV_NONE
Invalid version.
EV_CURRENT
Current version.
EI_OSABI
The eighth byte identifies the operating system and ABI to which the object is targeted. Some fields in other ELF structures have flags and values that have platform-specific meanings; the interpretation of those fields is determined by the value of this byte. For example:
ELFOSABI_NONE
Same as ELFOSABI_SYSV
ELFOSABI_SYSV
UNIX System V ABI.
ELFOSABI_HPUX
HP-UX ABI.
ELFOSABI_NETBSD
NetBSD ABI.
ELFOSABI_LINUX
Linux ABI.
ELFOSABI_SOLARIS
Solaris ABI.
ELFOSABI_IRIX
IRIX ABI.
ELFOSABI_FREEBSD
FreeBSD ABI.
ELFOSABI_TRU64
TRU64 UNIX ABI.
ELFOSABI_ARM
ARM architecture ABI.
ELFOSABI_STANDALONE
Stand-alone (embedded) ABI.
EI_ABIVERSION
The ninth byte identifies the version of the ABI to which the object is targeted. This field is used to distinguish among incompatible versions of an ABI. The interpretation of this version number is dependent on the ABI identified by the EI_OSABI field. Applications conforming to this specification use the value 0.
EI_PAD
Start of padding. These bytes are reserved and set to zero. Programs which read them should ignore them. The value for EI_PAD will change in the future if currently unused bytes are given meanings.
EI_NIDENT
The size of the e_ident array.
e_type
This member of the structure identifies the object file type:
ET_NONE
An unknown type.
ET_REL
A relocatable file.
ET_EXEC
An executable file.
ET_DYN
A shared object.
ET_CORE
A core file.
e_machine
This member specifies the required architecture for an individual file. For example:
EM_NONE
An unknown machine.
EM_M32
AT&T WE 32100.
EM_SPARC
Sun Microsystems SPARC.
EM_386
Intel 80386.
EM_68K
Motorola 68000.
EM_88K
Motorola 88000.
EM_860
Intel 80860.
EM_MIPS
MIPS RS3000 (big-endian only).
EM_PARISC
HP/PA.
EM_SPARC32PLUS
SPARC with enhanced instruction set.
EM_PPC
PowerPC.
EM_PPC64
PowerPC 64-bit.
EM_S390
IBM S/390
EM_ARM
Advanced RISC Machines
EM_SH
Renesas SuperH
EM_SPARCV9
SPARC v9 64-bit.
EM_IA_64
Intel Itanium
EM_X86_64
AMD x86-64
EM_VAX
DEC Vax.
e_version
This member identifies the file version:
EV_NONE
Invalid version.
EV_CURRENT
Current version.
e_entry
This member gives the virtual address to which the system first transfers control, thus starting the process. If the file has no associated entry point, this member holds zero.
e_phoff
This member holds the program header table’s file offset in bytes. If the file has no program header table, this member holds zero.
e_shoff
This member holds the section header table’s file offset in bytes. If the file has no section header table, this member holds zero.
e_flags
This member holds processor-specific flags associated with the file. Flag names take the form EF_‘machine_flag’. Currently no flags have been defined.
e_ehsize
This member holds the ELF header’s size in bytes.
e_phentsize
This member holds the size in bytes of one entry in the file’s program header table; all entries are the same size.
e_phnum
This member holds the number of entries in the program header table. Thus the product of e_phentsize and e_phnum gives the table’s size in bytes. If a file has no program header, e_phnum holds the value zero.
If the number of entries in the program header table is larger than or equal to
PN_XNUM (0xffff), this member holds PN_XNUM (0xffff) and the real number of entries in the program header table is held in the sh_info member of the initial entry in section header table. Otherwise, the sh_info member of the initial entry contains the value zero.
PN_XNUM
This is defined as 0xffff, the largest number e_phnum can have, specifying where the actual number of program headers is assigned.
e_shentsize
This member holds a sections header’s size in bytes. A section header is one entry in the section header table; all entries are the same size.
e_shnum
This member holds the number of entries in the section header table. Thus the product of e_shentsize and e_shnum gives the section header table’s size in bytes. If a file has no section header table, e_shnum holds the value of zero.
If the number of entries in the section header table is larger than or equal to
SHN_LORESERVE (0xff00), e_shnum holds the value zero and the real number of entries in the section header table is held in the sh_size member of the initial entry in section header table. Otherwise, the sh_size member of the initial entry in the section header table holds the value zero.
e_shstrndx
This member holds the section header table index of the entry associated with the section name string table. If the file has no section name string table, this member holds the value SHN_UNDEF.
If the index of section name string table section is larger than or equal to
SHN_LORESERVE (0xff00), this member holds SHN_XINDEX (0xffff) and the real index of the section name string table section is held in the sh_link member of the initial entry in section header table. Otherwise, the sh_link member of the initial entry in section header table contains the value zero.
SHN_UNDEF
This value marks an undefined, missing, irrelevant, or otherwise meaningless section reference. For example, a symbol "defined" relative to section number SHN_UNDEF is an undefined symbol.
SHN_LORESERVE
This value specifies the lower bound of the range of reserved indices.
SHN_LOPROC
Values greater than or equal to SHN_HIPROC are reserved for processor-specific semantics.
SHN_HIPROC
Values less than or equal to SHN_LOPROC are reserved for processor-specific semantics.
SHN_ABS
This value specifies absolute values for the corresponding reference. For example, symbols defined relative to section number SHN_ABS have absolute values and are not affected by relocation.
SHN_COMMON
Symbols defined relative to this section are common symbols, such as Fortran COMMON or unallocated C external variables.
SHN_HIRESERVE
This value specifies the upper bound of the range of reserved indices between SHN_LORESERVE and SHN_HIRESERVE, inclusive; the values do not reference the section header table. That is, the section header table does not contain entries for the reserved indices.

An executable or shared object file’s program header table is an array of structures, each describing a segment or other information the system needs to prepare the program for execution. An object file segment contains one or more sections. Program headers are meaningful only for executable and shared object files. A file specifies its own program header size with the ELF header’s e_phentsize and e_phnum members. The ELF program header is described by the type Elf32_Phdr or Elf64_Phdr depending on the architecture: 

typedef struct {
    uint32_t   p_type;
    Elf32_Off  p_offset;
    Elf32_Addr p_vaddr;
    Elf32_Addr p_paddr;
    uint32_t   p_filesz;
    uint32_t   p_memsz;
    uint32_t   p_flags;
    uint32_t   p_align;
} Elf32_Phdr;


typedef struct {
    uint32_t   p_type;
    uint32_t   p_flags;
    Elf64_Off  p_offset;
    Elf64_Addr p_vaddr;
    Elf64_Addr p_paddr;
    uint64_t   p_filesz;
    uint64_t   p_memsz;
    uint64_t   p_align;
} Elf64_Phdr;

The main difference between the 32-bit and the 64-bit program header lies in the location of the p_flags member in the total struct.

p_type
This member of the Phdr struct tells what kind of segment this array element describes or how to interpret the array element’s information.
PT_NULL
The array element is unused and the other members’ values are undefined. This lets the program header have ignored entries.
PT_LOAD
The array element specifies a loadable segment, described by p_filesz and p_memsz. The bytes from the file are mapped to the beginning of the memory segment. If the segment’s memory size p_memsz is larger than the file size p_filesz, the "extra" bytes are defined to hold the value 0 and to follow the segment’s initialized area. The file size may not be larger than the memory size. Loadable segment entries in the program header table appear in ascending order, sorted on the p_vaddr member.
PT_DYNAMIC
The array element specifies dynamic linking information.
PT_INTERP
The array element specifies the location and size of a null-terminated pathname to invoke as an interpreter. This segment type is meaningful only for executable files (though it may occur for shared objects). However it may not occur more than once in a file. If it is present, it must precede any loadable segment entry.
PT_NOTE
The array element specifies the location and size for auxiliary information.
PT_SHLIB
This segment type is reserved but has unspecified semantics. Programs that contain an array element of this type do not conform to the ABI.
PT_PHDR
The array element, if present, specifies the location and size of the program header table itself, both in the file and in the memory image of the program. This segment type may not occur more than once in a file. Moreover, it may occur only if the program header table is part of the memory image of the program. If it is present, it must precede any loadable segment entry.
PT_LOPROC
Values greater than or equal to PT_HIPROC are reserved for processor-specific semantics.
PT_HIPROC
Values less than or equal to PT_LOPROC are reserved for processor-specific semantics.
PT_GNU_STACK
GNU extension which is used by the Linux kernel to control the state of the stack via the flags set in the p_flags member.
p_offset
This member holds the offset from the beginning of the file at which the first byte of the segment resides.
p_vaddr
This member holds the virtual address at which the first byte of the segment resides in memory.
p_paddr
On systems for which physical addressing is relevant, this member is reserved for the segment’s physical address. Under BSD this member is not used and must be zero.
p_filesz
This member holds the number of bytes in the file image of the segment. It may be zero.
p_memsz
This member holds the number of bytes in the memory image of the segment. It may be zero.
p_flags
This member holds a bit mask of flags relevant to the segment:
PF_X
An executable segment.
PF_W
A writable segment.
PF_R
A readable segment.
A text segment commonly has the flags
PF_X and PF_R. A data segment commonly has PF_X, PF_W and PF_R.
p_align
This member holds the value to which the segments are aligned in memory and in the file. Loadable process segments must have congruent values for p_vaddr and p_offset, modulo the page size. Values of zero and one mean no alignment is required. Otherwise, p_align should be a positive, integral power of two, and p_vaddr should equal p_offset, modulo p_align.

A file’s section header table lets one locate all the file’s sections. The section header table is an array of Elf32_Shdr or Elf64_Shdr structures. The ELF header’s e_shoff member gives the byte offset from the beginning of the file to the section header table. e_shnum holds the number of entries the section header table contains. e_shentsize holds the size in bytes of each entry.

A section header table index is a subscript into this array. Some section header table indices are reserved: the initial entry and the indices between SHN_LORESERVE and SHN_HIRESERVE. The initial entry is used in ELF extensions for e_phnum, e_shnum and e_strndx; in other cases, each field in the initial entry is set to zero. An object file does not have sections for these special indices:

SHN_UNDEF
This value marks an undefined, missing, irrelevant, or otherwise meaningless section reference.
SHN_LORESERVE
This value specifies the lower bound of the range of reserved indices.
SHN_LOPROC
Values greater than or equal to SHN_HIPROC are reserved for processor-specific semantics.
SHN_HIPROC
Values less than or equal to SHN_LOPROC are reserved for processor-specific semantics.
SHN_ABS
This value specifies the absolute value for the corresponding reference. For example, a symbol defined relative to section number SHN_ABS has an absolute value and is not affected by relocation.
SHN_COMMON
Symbols defined relative to this section are common symbols, such as FORTRAN COMMON or unallocated C external variables.
SHN_HIRESERVE
This value specifies the upper bound of the range of reserved indices. The system reserves indices between SHN_LORESERVE and SHN_HIRESERVE, inclusive. The section header table does not contain entries for the reserved indices.

The section header has the following structure: 

typedef struct {
    uint32_t   sh_name;
    uint32_t   sh_type;
    uint32_t   sh_flags;
    Elf32_Addr sh_addr;
    Elf32_Off  sh_offset;
    uint32_t   sh_size;
    uint32_t   sh_link;
    uint32_t   sh_info;
    uint32_t   sh_addralign;
    uint32_t   sh_entsize;
} Elf32_Shdr;


typedef struct {
    uint32_t   sh_name;
    uint32_t   sh_type;
    uint64_t   sh_flags;
    Elf64_Addr sh_addr;
    Elf64_Off  sh_offset;
    uint64_t   sh_size;
    uint32_t   sh_link;
    uint32_t   sh_info;
    uint64_t   sh_addralign;
    uint64_t   sh_entsize;
} Elf64_Shdr;

No real differences exist between the 32-bit and 64-bit section headers.

sh_name
This member specifies the name of the section. Its value is an index into the section header string table section, giving the location of a null-terminated string.
sh_type
This member categorizes the section’s contents and semantics.
SHT_NULL
This value marks the section header as inactive. It does not have an associated section. Other members of the section header have undefined values.
SHT_PROGBITS
This section holds information defined by the program, whose format and meaning are determined solely by the program.
SHT_SYMTAB
This section holds a symbol table. Typically, SHT_SYMTAB provides symbols for link editing, though it may also be used for dynamic linking. As a complete symbol table, it may contain many symbols unnecessary for dynamic linking. An object file can also contain a SHT_DYNSYM section.
SHT_STRTAB
This section holds a string table. An object file may have multiple string table sections.
SHT_RELA
This section holds relocation entries with explicit addends, such as type Elf32_Rela for the 32-bit class of object files. An object may have multiple relocation sections.
SHT_HASH
This section holds a symbol hash table. An object participating in dynamic linking must contain a symbol hash table. An object file may have only one hash table.
SHT_DYNAMIC
This section holds information for dynamic linking. An object file may have only one dynamic section.
SHT_NOTE
This section holds information that marks the file in some way.
SHT_NOBITS
A section of this type occupies no space in the file but otherwise resembles SHT_PROGBITS. Although this section contains no bytes, the sh_offset member contains the conceptual file offset.
SHT_REL
This section holds relocation offsets without explicit addends, such as type Elf32_Rel for the 32-bit class of object files. An object file may have multiple relocation sections.
SHT_SHLIB
This section is reserved but has unspecified semantics.
SHT_DYNSYM
This section holds a minimal set of dynamic linking symbols. An object file can also contain a SHT_SYMTAB section.
SHT_LOPROC
This value up to and including SHT_HIPROC is reserved for processor-specific semantics.
SHT_HIPROC
This value down to and including SHT_LOPROC is reserved for processor-specific semantics.
SHT_LOUSER
This value specifies the lower bound of the range of indices reserved for application programs.
SHT_HIUSER
This value specifies the upper bound of the range of indices reserved for application programs. Section types between SHT_LOUSER and SHT_HIUSER may be used by the application, without conflicting with current or future system-defined section types.
sh_flags
Sections support one-bit flags that describe miscellaneous attributes. If a flag bit is set in sh_flags, the attribute is "on" for the section. Otherwise, the attribute is "off" or does not apply. Undefined attributes are set to zero.
SHF_WRITE
This section contains data that should be writable during process execution.
SHF_ALLOC
This section occupies memory during process execution. Some control sections do not reside in the memory image of an object file. This attribute is off for those sections.
SHF_EXECINSTR
This section contains executable machine instructions.
SHF_MASKPROC
All bits included in this mask are reserved for processor-specific semantics.
sh_addr
If this section appears in the memory image of a process, this member holds the address at which the section’s first byte should reside. Otherwise, the member contains zero.
sh_offset
This member’s value holds the byte offset from the beginning of the file to the first byte in the section. One section type, SHT_NOBITS, occupies no space in the file, and its sh_offset member locates the conceptual placement in the file.
sh_size
This member holds the section’s size in bytes. Unless the section type is SHT_NOBITS, the section occupies sh_size bytes in the file. A section of type SHT_NOBITS may have a nonzero size, but it occupies no space in the file.
sh_link
This member holds a section header table index link, whose interpretation depends on the section type.
sh_info
This member holds extra information, whose interpretation depends on the section type.
sh_addralign
Some sections have address alignment constraints. If a section holds a doubleword, the system must ensure doubleword alignment for the entire section. That is, the value of sh_addr must be congruent to zero, modulo the value of sh_addralign. Only zero and positive integral powers of two are allowed. Values of zero or one mean the section has no alignment constraints.
sh_entsize
Some sections hold a table of fixed-sized entries, such as a symbol table. For such a section, this member gives the size in bytes for each entry. This member contains zero if the section does not hold a table of fixed-size entries.

Various sections hold program and control information:

String table sections hold null-terminated character sequences, commonly called strings. The object file uses these strings to represent symbol and section names. One references a string as an index into the string table section. The first byte, which is index zero, is defined to hold a null byte (aq\0aq). Similarly, a string table’s last byte is defined to hold a null byte, ensuring null termination for all strings.

An object file’s symbol table holds information needed to locate and relocate a program’s symbolic definitions and references. A symbol table index is a subscript into this array. 

typedef struct {
    uint32_t      st_name;
    Elf32_Addr    st_value;
    uint32_t      st_size;
    unsigned char st_info;
    unsigned char st_other;
    uint16_t      st_shndx;
} Elf32_Sym;


typedef struct {
    uint32_t      st_name;
    unsigned char st_info;
    unsigned char st_other;
    uint16_t      st_shndx;
    Elf64_Addr    st_value;
    uint64_t      st_size;
} Elf64_Sym;

The 32-bit and 64-bit versions have the same members, just in a different order.

st_name
This member holds an index into the object file’s symbol string table, which holds character representations of the symbol names. If the value is nonzero, it represents a string table index that gives the symbol name. Otherwise, the symbol table has no name.
st_value
This member gives the value of the associated symbol.
st_size
Many symbols have associated sizes. This member holds zero if the symbol has no size or an unknown size.
st_info
This member specifies the symbol’s type and binding attributes:
STT_NOTYPE
The symbol’s type is not defined.
STT_OBJECT
The symbol is associated with a data object.
STT_FUNC
The symbol is associated with a function or other executable code.
STT_SECTION
The symbol is associated with a section. Symbol table entries of this type exist primarily for relocation and normally have STB_LOCAL bindings.
STT_FILE
By convention, the symbol’s name gives the name of the source file associated with the object file. A file symbol has STB_LOCAL bindings, its section index is SHN_ABS, and it precedes the other STB_LOCAL symbols of the file, if it is present.
STT_LOPROC
This value up to and including STT_HIPROC is reserved for processor-specific semantics.
STT_HIPROC
This value down to and including STT_LOPROC is reserved for processor-specific semantics.
STB_LOCAL
Local symbols are not visible outside the object file containing their definition. Local symbols of the same name may exist in multiple files without interfering with each other.
STB_GLOBAL
Global symbols are visible to all object files being combined. One file’s definition of a global symbol will satisfy another file’s undefined reference to the same symbol.
STB_WEAK
Weak symbols resemble global symbols, but their definitions have lower precedence.
STB_LOPROC
This value up to and including STB_HIPROC is reserved for processor-specific semantics.
STB_HIPROC
This value down to and including STB_LOPROC is reserved for processor-specific semantics.
There are macros for packing and unpacking the binding and type fields:
ELF32_ST_BIND(info)
or ELF64_ST_BIND(info) extract a binding from an st_info value.
ELF32_ST_TYPE(info)
or ELF64_ST_TYPE(info)
extract a type from an st_info value.
ELF32_ST_INFO(bind, type)
or ELF64_ST_INFO(bind, type)
convert a binding and a type into an st_info value.
st_other
This member defines the symbol visibility.
STV_DEFAULT
Default symbol visibility rules.
STV_INTERNAL
Processor-specific hidden class.
STV_HIDDEN
Symbol is unavailable in other modules.
STV_PROTECTED
Not preemptible, not exported.

There are macros for extracting the visibility type:

ELF32_ST_VISIBILITY(other) or ELF64_ST_VISIBILITY(other)

st_shndx
Every symbol table entry is "defined" in relation to some section. This member holds the relevant section header table index.

Relocation is the process of connecting symbolic references with symbolic definitions. Relocatable files must have information that describes how to modify their section contents, thus allowing executable and shared object files to hold the right information for a process’s program image. Relocation entries are these data.

Relocation structures that do not need an addend: 

typedef struct {
    Elf32_Addr r_offset;
    uint32_t   r_info;
} Elf32_Rel;


typedef struct {
    Elf64_Addr r_offset;
    uint64_t   r_info;
} Elf64_Rel;

Relocation structures that need an addend: 

typedef struct {
    Elf32_Addr r_offset;
    uint32_t   r_info;
    int32_t    r_addend;
} Elf32_Rela;


typedef struct {
    Elf64_Addr r_offset;
    uint64_t   r_info;
    int64_t    r_addend;
} Elf64_Rela;
r_offset
This member gives the location at which to apply the relocation action. For a relocatable file, the value is the byte offset from the beginning of the section to the storage unit affected by the relocation. For an executable file or shared object, the value is the virtual address of the storage unit affected by the relocation.
r_info
This member gives both the symbol table index with respect to which the relocation must be made and the type of relocation to apply. Relocation types are processor-specific. When the text refers to a relocation entry’s relocation type or symbol table index, it means the result of applying ELF[32|64]_R_TYPE or ELF[32|64]_R_SYM, respectively, to the entry’s r_info member.
r_addend
This member specifies a constant addend used to compute the value to be stored into the relocatable field.

The .dynamic section contains a series of structures that hold relevant dynamic linking information. The d_tag member controls the interpretation of d_un. 

typedef struct {
    Elf32_Sword    d_tag;
    union {
        Elf32_Word d_val;
        Elf32_Addr d_ptr;
    } d_un;
} Elf32_Dyn;
extern Elf32_Dyn _DYNAMIC[];


typedef struct {
    Elf64_Sxword    d_tag;
    union {
        Elf64_Xword d_val;
        Elf64_Addr  d_ptr;
    } d_un;
} Elf64_Dyn;
extern Elf64_Dyn _DYNAMIC[];
d_tag
This member may have any of the following values:
DT_NULL
Marks end of dynamic section
DT_NEEDED
String table offset to name of a needed library
DT_PLTRELSZ
Size in bytes of PLT relocs
DT_PLTGOT
Address of PLT and/or GOT
DT_HASH
Address of symbol hash table
DT_STRTAB
Address of string table
DT_SYMTAB
Address of symbol table
DT_RELA
Address of Rela relocs table
DT_RELASZ
Size in bytes of Rela table
DT_RELAENT
Size in bytes of a Rela table entry
DT_STRSZ
Size in bytes of string table
DT_SYMENT
Size in bytes of a symbol table entry
DT_INIT
Address of the initialization function
DT_FINI
Address of the termination function
DT_SONAME
String table offset to name of shared object
DT_RPATH
String table offset to library search path (deprecated)
DT_SYMBOLIC
Alert linker to search this shared object before the executable for symbols
DT_REL
Address of Rel relocs table
DT_RELSZ
Size in bytes of Rel table
DT_RELENT
Size in bytes of a Rel table entry
DT_PLTREL
Type of reloc the PLT refers (Rela or Rel)
DT_DEBUG
Undefined use for debugging
DT_TEXTREL
Absence of this indicates no relocs should apply to a nonwritable segment
DT_JMPREL
Address of reloc entries solely for the PLT
DT_BIND_NOW
Instruct dynamic linker to process all relocs before transferring control to the executable
DT_RUNPATH
String table offset to library search path
DT_LOPROC
Start of processor-specific semantics
DT_HIPROC
End of processor-specific semantics
d_val
This member represents integer values with various interpretations.
d_ptr
This member represents program virtual addresses. When interpreting these addresses, the actual address should be computed based on the original file value and memory base address. Files do not contain relocation entries to fixup these addresses.
_DYNAMIC
Array containing all the dynamic structures in the .dynamic section. This is automatically populated by the linker.

Notes

ELF first appeared in System V. The ELF format is an adopted standard.

The extensions for e_phnum, e_shnum and e_strndx respectively are Linux extensions. Sun, BSD and AMD64 also support them; for further information, look under SEE ALSO.

See Also

as(1) , gdb(1) , ld(1) , objdump(1) , execve(2) , core(5)

Hewlett-Packard, Elf-64 Object File Format.

Santa Cruz Operation, System V Application Binary Interface.

UNIX System Laboratories, "Object Files", Executable and Linking Format (ELF).

Sun Microsystems, Linker and Libraries Guide.

AMD64 ABI Draft, System V Application Binary Interface AMD64 Architecture Processor Supplement.

Colophon

This page is part of release 3.78 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at http://www.kernel.org/doc/man-pages/.

Table of Contents