[Go to CFHT Home Page] Man Pages
Back to Software Index  BORDER=0Manpage Top Level
    ddi_add_intr(9F) manual page Table of Contents

Name

ddi_add_intr, ddi_get_iblock_cookie, ddi_remove_intr - hardware interrupt handling routines

Synopsis


#include <sys/types.h>
#include <sys/conf.h>
#include <sys/ddi.h>
#include <sys/sunddi.h>

int ddi_get_iblock_cookie(dev_info_t *dip, u_int inumber, ddi_iblock_cookie_t *iblock_cookiep);

int ddi_add_intr(dev_info_t *dip, u_int inumber, ddi_iblock_cookie_t *iblock_cookiep, ddi_idevice_cookie_t *idevice_cookiep, u_int (*int_handler)(caddr_t), caddr_t int_handler_arg);

void ddi_remove_intr(dev_info_t *dip, u_int inumber, ddi_iblock_cookie_t iblock_cookie);

Interface Level

Solaris DDI specific (Solaris DDI).

Arguments

ddi_get_iblock_cookie()

dip
Pointer to dev_info structure.
inumber
Interrupt number.
iblock_cookiep
Pointer to an interrupt block cookie.

ddi_add_intr()

dip
Pointer to dev_info structure.
inumber
Interrupt number.
iblock_cookiep
Optional pointer to an interrupt block cookie where a returned interrupt block cookie is stored.
idevice_cookiep
Optional pointer to an interrupt device cookie where a returned interrupt device cookie is stored.
int_handler
Pointer to interrupt handler.
int_handler_arg
Argument for interrupt handler.

ddi_remove_intr()

dip
Pointer to dev_info structure.
inumber
Interrupt number.
iblock_cookie
Block cookie which identifies the interrupt handler to be removed.

Description

ddi_get_iblock_cookie()

ddi_get_iblock_cookie() retrieves the interrupt block cookie associated with a particular interrupt specification. This routine should be called before ddi_add_intr() to retrieve the interrupt block cookie needed to initialize locks ( mutex(9F) , rwlock(9F) ) used by the interrupt routine. The interrupt number inumber determines which interrupt specification to retrieve the cookie for. inumber is associated with information provided either by the device (see sbus(4) ) or the hardware configuration file (see vme(4) , sysbus(4) , isa(4) , eisa(4) , mca(4) , and driver.conf(4) ). If only one interrupt is associated with the device, inumber should be 0.

On a successful return, *iblock_cookiep contains information needed for initializing locks associated with the interrupt specification corresponding to inumber (see mutex_init(9F) and rw_init(9F) ). The driver can then initialize locks acquired by the interrupt routine before calling ddi_add_intr() which prevents a possible race condition where the driver’s interrupt handler is called immediately after the driver has called ddi_add_intr() but before the driver has initialized the locks. This may happen when an interrupt for a different device occurs on the same interrupt level. If the interrupt routine acquires the lock before the lock has been initialized, undefined behavior may result.

ddi_add_intr()

ddi_add_intr() adds an interrupt handler to the system. The interrupt number inumber determines which interrupt the handler will be associated with. (Refer to ddi_get_iblock_cookie() above.)

On a successful return, iblock_cookiep contains information used for initializing locks associated with this interrupt specification (see mutex_init(9F) and rw_init(9F) ). Note that the interrupt block cookie is usually obtained using ddi_get_iblock_cookie() to avoid the race conditions described above (refer to ddi_get_iblock_cookie() above). For this reason, iblock_cookiep is no longer useful and should be set to NULL .

On a successful return, idevice_cookiep contains a pointer to a ddi_idevice_cookie_t structure (see ddi_idevice_cookie(9S) ) containing information useful for some devices that have programmable interrupts. If idevice_cookiep is set to NULL , no value is returned.

The routine intr_handler, with its argument int_handler_arg, is called upon receipt of the appropriate interrupt. The interrupt handler should return DDI_INTR_CLAIMED if the interrupt was claimed, DDI_INTR_UNCLAIMED otherwise.

If successful, ddi_add_intr() will return DDI_SUCCESS; if the interrupt information cannot be found, it will return DDI_INTR_NOTFOUND.

ddi_remove_intr()

ddi_remove_intr() removes an interrupt handler from the system. Unloadable drivers should call this routine during their detach(9E) routine to remove their interrupt handler from the system.

The device interrupt routine for this instance of the device will not execute after ddi_remove_intr() returns. ddi_remove_intr() may need to wait for the device interrupt routine to complete before returning. Therefore, locks acquired by the interrupt handler should not be held across the call to ddi_remove_intr() or deadlock may result.

Return Values

ddi_add_intr() and ddi_get_iblock_cookie() return:

DDI_SUCCESS
on success.
DDI_INTR_NOTFOUND
on failure to find the interrupt.

Context

ddi_add_intr(), ddi_remove_intr(), and ddi_get_iblock_cookie() can be called from user or kernel context.

See Also

driver.conf(4) , eisa(4) , isa(4) , mca(4) , sbus(4) , sysbus(4) , vme(4) , attach(9E) , detach(9E) , ddi_intr_hilevel(9F) , mutex(9F) , mutex_init(9F) , rw_init(9F) , rwlock(9F) , ddi_idevice_cookie(9S)

Bugs

The idevice_cookiep should really point to a data structure that is specific to the bus architecture that the device operates on. Currently only VMEbus and SBus are supported and a single data structure is used to describe both.


Table of Contents